Although HP printers are renowned for their dependability and efficiency, just like any other technological item, they occasionally have malfunctions. “Error E8” is one of the less frequent but nevertheless annoying problems. The HP printer may occasionally display an error code E8, which is typically the result of a programming anomaly, a malfunction in the scanner, or an issue with the engine relationship. In rare circumstances, the components may also need to be replaced because they are worn out. Alternatively, it’s possible that merely residue had accumulated and the printer needed to be cleaned properly.

What is HP Error E8?

A numerical number known as HP Error E8 shows on the screen of your computer or printer when there is a problem with the paper feed mechanism. This error signifies an issue with the printer’s capacity to accurately pick up and feed paper. It is not common for HP printer error codes to include HP Error E8. Error codes are usually shown by HP printers in a certain manner that makes it easier for users to determine what’s wrong. Typically, these error codes are alphanumeric, like “0x…” or “B8…”, and they include a brief explanation of the problem.

“Error E8” might not be an error code that HP has detected or recorded if you are having issues with your HP printer. In these situations, it’s a good idea to look for the entire error message or code on the printer’s display, since this might provide further details about the problem. After that, you may consult the printer’s manual or get in touch with HP customer service for help in diagnosing and fixing the particular issue you’re having.

Potential Reasons for HP Error E8:

  • Paper Jam: Error E8 is frequently caused by a paper jam. The paper feed mechanism of the printer can be interfered with by even a little piece of shredded paper or a foreign item within.
  • Incorrect Paper Type or Size: E8 errors may arise if the paper you’re using doesn’t meet the requirements specified in your printer’s settings.
  • Dirty or Worn Rollers: As paper feed rollers age, they may wear down or gather dust and debris, which can lead to feeding issues.
  • Outdated or Corrupt Printer Drivers: Errors like E8 can occasionally be caused by outdated or corrupt printer drivers.
  • Hardware failure: This error may occasionally be caused by a hardware failure.

How to Fix HP Error E8:

  • To clear paper jams: open the printer, take out any debris or stuck paper, and then close it. Make that the input and output trays are free of any jammed paper.
  • Verify Paper Settings: According to your printer’s settings, confirm that you are using the appropriate paper size and type. Modify the parameters if required.
  • Clean Rollers: Check for wear, debris, and filth on the paper feed rollers. Use isopropyl alcohol and a lint-free cloth to gently clean them.
  • Update Printer Drivers: Make sure the drivers for your printer are current. The HP website has the most recent drivers available for download.
  • Restart the Printer: Switch off the printer, take it out of the power supply, give it a minute, then plug it back in and switch it back on.
  • Carry out a Hard Reset: You may reset some HP printers by pressing down on particular buttons or combinations. To learn how to do a hard reset on your printer, consult the manual.
  • Get in touch with HP Support: If the problem still exists after attempting the above fixes, a hardware problem could be to blame. For more help, get in touch with HP support or a qualified professional.

Try the following Arrangements to resolve the HP printer error e8:

Arrangement 1

  • Step 1: Lift the scanner cover on the printer.
  • Step 2: Raise the scanner head so that the object beneath can be seen clearly.
  • Step 3: Look around to see if there are any papers, leftover fragments, or strange objects.
  • Step 4: If any of the above objects are located, get rid of them.

Check to see whether the HP printer error e8 has been resolved after using the above methods. Proceed to arrangement 2 assuming that the error persists.

Arrangement 2

  • Step 1: Lift the scanner cover on the printer.
  • Step 2: Lift the scanner to a lateral position and ensure it is beneath the scanner cover.
  • Stage 3: Gently clean the encoder strip using a build-up-free substance.

Check to make sure the error has been corrected after using the above methods. If the error persists, proceed to arrangement 3.

Arrangement 3

When the print head is not in its intended position, this configuration functions. To correct this error, use the methods below:

  • Step 1: Your HP printer is depressed.
  • Step 2: Disconnect your printer, PC, and wall power source from the link (power, USB, and Ethernet).
  • Step 3: Give the printer ten or so minutes to cool down.
  • Step 4: Unplug your HP printer and reposition the printhead to its correct location.
  • Step 5: Activate the HP printer.

Verify whether the error has been corrected. In the unlikely event that the error persists, go to arrangement 4.

Arrangement 4

When the print head is not in its intended position, this configuration functions. To correct this error, use the methods below:

  • Step 1: Unplug your HP printer’s power connection.
  • Step 2: Unplug the USB connection from your computer and printer.
  • Step 3: Give the printer ten or so minutes to cool down.
  • Step 4: Pour water all over a sensitive, build-up-free material. Pulverize it well to remove a lot of water.
  • Step 5: Gently clean the scanner glass of the printer. Make sure nothing leaks into the printer.
  • Step 6: Reestablish the connections (USB and power).
  • Step 7: Switch on your printer.


HP Error E8 might cause problems for you when printing, but you can usually fix it and get your printer back to functioning properly by following the correct balance procedures. Always go to the instructions that came with your printer, and if the problem persists, think about contacting HP support. Maintaining your HP printer properly and using the right paper will help you avoid Error E8 in the first place and keep it from happening again.